How to make kinetic typography without After Effects

Make kinetic typography without After Effects: step by step in a browser editor with presets, plus what Canva, CapCut and Premiere Pro can and can't do.

A dark grid with one bright green cell and rows of keyframe dots, above the headline Kinetic typography without After Effects and a green Guides label

You can make kinetic typography without After Effects. A browser editor built around animated type, such as Swash, gets you there fastest: you type the words, apply a preset that is already a finished animation, adjust the timing and export a video, with no keyframes and nothing to install. General video tools such as Canva, CapCut and Premiere Pro also animate text, which is enough for captions and simple titles, but they give you much less control over how the letters themselves move.

This guide walks through a kinetic type clip from a blank page to an exported MP4, then looks at what the other tools can do and when After Effects is still worth learning. If you are new to the term, start with What is kinetic typography?

What a kinetic type tool needs to do

Kinetic typography is more than text with a fade. Before picking a tool, check that it can do the moves the genre is built on:

  • Timing per word or letter. Words arrive one after another, on the beat, not all at once.
  • Motion with character. Easing, overshoot, blur and rotation, so a word can snap in or drift in.
  • Control over the type. Font, size, spacing and, ideally, the weight and width axes of variable fonts.
  • Formats for where the clip goes. A 9:16 story, a 4:5 post and a 16:9 video from the same animation.
  • Sound. A hit on the key word makes muted clips readable and unmuted ones land.

After Effects does all of this by hand. The tools below do some or all of it for you.

Make kinetic typography in the browser, step by step

The steps below use Swash. It runs in any desktop browser and you can try it as a guest, without an account.

1. Write the message before you animate

Write the line down and mark one hero word: the word the viewer must remember. A short clip usually has one hero word, one supporting phrase and an end frame with the name, date or call to action. Read it aloud. Where your voice puts the stress is where the motion should land.

2. Open the editor and pick a format

Open the editor. With nothing selected, the inspector on the right shows Canvas: set Aspect ratio to where the clip will be posted, such as 9:16 for stories and Reels or 4:5 for a feed post. You can add the other formats at the end, so start with the main one. Your first animation has a tour of the editor.

3. Add the text and choose a font

Click T in the top bar to add a text layer, double-click it and type. Put each phrase that should arrive on its own beat in its own text layer. In the Text section, choose the font, size and spacing. Bold sans serifs survive fast motion; fonts that list axes such as wght next to their name are variable and can animate their weight later. See Text and fonts.

4. Apply a preset

Select a text, open Presets in the left rail and click a card in the Library. The card's motion goes onto your text straight away.

The text is selected, Presets opens the Library, and one click on a card sets the letters moving.

A preset is a finished animation made of layers called animators, such as move, fade, scale or blur. They appear in the Animators section of the inspector, where you can change their timing and settings. Because the motion is separate from the words, you can change the text, font or colour later and the animation stays. Presets and animators covers searching and saving your own.

5. Stack presets and set the timing

A second click on another card adds to the first instead of replacing it, so an entrance, a wave in the middle and an exit can run on one text. See Combine presets.

For a word-by-word sequence, stagger the text layers on the timeline: drag each layer's strip so that it starts as the one before it finishes. Set the total length with Duration and turn on Loop for a clip that repeats.

TemplateEchoFive short phrases arrive one after another, each with its own move, blur and colour change. Open it, type your own lines and keep the rhythm.Open in editorOpens a copy in your projects

6. Add the moves After Effects makes you build

These are the effects that take the longest to set up by hand, and in Swash each one is a preset or a section in the inspector:

  • Variable font axes. The Variable axes filter in the library animates the weight or width of a variable font, so a word can swell and thin without changing typeface. The Change font animator morphs the letters into a different font. See Variable fonts and axes.
  • 3D text. The 3D filter turns a text into a ring, sphere, helix, tunnel and more. Most 3D cards need Pro; Text tunnel works on the free plan. See Give text a 3D shape.
  • Text on a path, marquees and word cyclers. Letters can follow a wave, an arc or a curve, scroll as an endless line or swap through a list of words. See Text motion beyond presets.
TemplateTypography HelixThe word Typography runs along a spiral while a wave rolls through the weight of each letter. Swap in your own word and font.Open in editorOpens a copy in your projects

7. Give it a look and a sound

Open Shaders in the left rail and click a card to put an effect over the whole frame: film looks such as grain and CRT, print looks such as halftone and dither, distortions and blurs. Every shader works on the free plan. See Effects and shaders.

Entrance and exit presets come with a matching sound, timed to the move, from a library of over 270 sounds. You can change or remove it in the Sound row of each animator, and add a music track under Audio on the timeline. See Sound.

8. Make other formats and export

To get a story and a feed version from the same animation, right-click the artboard label and choose Add format…. Swash lays everything out for the new frame, and you can adjust each version on its own. See Artboards and formats.

Add format… on the artboard label, then 9:16: the same animation, laid out as a vertical story.

Then click Export in the top bar and choose MP4, GIF or a PNG frame. The free plan exports up to 720p at 30 fps with a small Swash mark, plus a few exports a month without it; Pro exports up to 4K at 60 fps with no mark. Export has the details.

If you would rather not start from a blank page, open any of the templates: each one is a full project, so you change the words and keep the motion.

Canva, CapCut and Premiere Pro

These tools are not built for kinetic typography, but many people already have them. Here is what each one can do with text.

Canva

Select a text box, open Animate and pick the Text tab: Canva offers text styles such as pan, fade, rise and pop, where each character bounces in. You can also draw a motion path by dragging an element with Create an animation. Each animation runs for at most 10 seconds, more styles are on the paid plans, and Canva does not support variable fonts, so weight and width cannot move. Free accounts download MP4 up to 1080p; paid plans go up to 4K (Canva help).

Canva suits a quick animated caption on a design you already made there. For timing word by word, or for motion inside the letters, it runs out of room fast.

CapCut

CapCut puts text on the video timeline. Each text clip can get an entrance, exit or looping animation, and the editor has a library of ready text templates. For custom moves you add keyframes for position, scale and opacity. It runs on the desktop, on phones and in the browser. Watermark-free export, 4K at 60 fps, premium effects and some templates and fonts need CapCut Pro.

CapCut is the natural choice for captions and titles over footage you have already cut there. A sequence where every word has its own move usually means a separate text clip and keyframes for each word.

Premiere Pro

Adobe now calls it simply Premiere. You animate a text layer with keyframes on its position, anchor point, scale, rotation and opacity, and refine the curves in Effect Controls. For anything more elaborate, editors use Motion Graphics templates (.mogrt): ready animated titles, often built in After Effects, that you install from the Graphics Templates panel and fill with your own words.

Premiere fits when the type goes into an edit you are already making there. Its keyframes move the text layer; for letter-by-letter kinetic type, editors usually reach for a template, and those are often made in After Effects.

Which tool should you use?

Tool How you animate text Good for Watch out for
Swash Presets you stack and time, in the browser Kinetic type, posters and social clips with sound Not a footage editor: videos up to 30 s; 4K and no watermark need Pro
Canva Preset styles per element A quick animated caption on a Canva design Up to 10 s per animation, no variable fonts
CapCut Text animations, templates and keyframes on a video timeline Captions and titles over footage Custom word-by-word timing is manual
Premiere Pro Keyframes and Motion Graphics templates Titles inside a video edit Elaborate titles often arrive as templates made in After Effects

If the type is the whole video, start in a tool built for type. If the type sits on top of footage you are editing anyway, add it in the video editor you already use.

When After Effects is still the right tool

After Effects remains the choice for work that goes beyond type: compositing text into live footage, motion tracking, character animation, long title sequences with expressions, and delivery to video pipelines in ProRes. If that is your job, the learning curve pays off. For animated type on its own, the side-by-side comparison in Swash vs After Effects shows where each one fits.

Questions about kinetic typography without After Effects

Can you make kinetic typography for free?

Yes. Swash runs in the browser and you can start as a guest; the free plan exports MP4 up to 720p at 30 fps with a small Swash mark, plus a few exports a month without it. Canva and CapCut also have free plans with basic text animations. See Plans and limits.

Do I need keyframes to make kinetic typography?

No. In a preset-based editor each preset is already a finished animation: you apply it, then adjust timing and settings in the inspector. Keyframes are how After Effects, Premiere and CapCut do it.

Can I make kinetic typography on my phone?

The Swash editor needs a window at least 900 pixels wide, so it works on a computer, not a phone. CapCut has a phone app with text animations if you need to work on mobile.

Can I use my own fonts and music?

Yes. In Swash you can upload a .ttf or .otf font and add your own music as mp3, wav, m4a or ogg files. See Upload your own font and Music and audio tracks.

What size should a kinetic typography video be?

Match the platform: 9:16 for stories, Reels and TikTok, 4:5 or 1:1 for feed posts, 16:9 for YouTube and websites. In Swash you can make one animation and add the other formats as versions of it with Add format….